Dell Equalogic commands

show member

This will print out your san group members with some basic info, as seen below.

Name Status Version Disks Capacity FreeSpace Connections
———- ——- ———- —– ———- ———- ———–
SAN01 online V7.0.5 (R3 48 31.69TB 1.58TB 9
90599)
SAN02 online V7.0.5 (R3 48 31.69TB 1.58TB 10
90599)

member select SAN01 show eth

This will print out status of your network cards

Name ifType ifSpeed Mtu Ipaddress Status Errors DCB
—- ————— ———- —- —————————– —— —— ——
eth0 ethernet-csmacd 10 Gbps 9000 10.10.10.100 up 0
on
eth1 ethernet-csmacd 10 Mbps 1500 10.10.10.101 down 0
off
eth2 ethernet-csmacd 100 Mbps 1500 192.168.10.100 up 0

To print out misc info

show grpparams